Capital Supply Inc is an authorized dealer for General Pipe Cleaners in Columbia, SC.
We carry a wide selection of products for your needs.
Super-Vee, The Small Line Specialist
The Super-Vee offers you a complete system for cleaning drain lines through 3” in diameter. With a variety of cables, cutters and accessories available, you have the right combination for any clogged drain problem.
The Super-Vee is built to clear clogged drains for a decade or more. And our Dyna-Thrust™ bearing system is one reason why, it helps carry the weight of the drum; significantly reducing wear on the motor shaft bearing and extending the life of the tool. Of course the cables are Flexicore® – with an integral wire rope center. Nobody makes cables like General.
Speedrooter 92, Job Tested Tough
Contractors know that the Speedrooter 92 really can take a beating – from its frame braced at key stress points, to General’s exclusive Flexicore® wire rope center cable that’s so tough it carries a one year warranty.
The Speedrooter 92’s field tested design offers easy handling. One person can easily load it onto a truck, as the machine slides smoothly from the loading wheel to the handle to the stair climbers and finally to the wheels. The adjustable height handle can be reset to be three inches longer or more compact, depending upon your preference.
With the driving and pulling power for long, tough jobs, General’s Power Cable Feed easily handles 3/4″, 5/8″, and 9/16″ cables. To adjust to different cable sizes, simply turn the knob on top of the feed.
Flat Sewer Rod, A Sturdy Tool For Cleaning Drain Lines and Sewers
Made from non-kinkable, high carbon, oil tempered steel. Equipped with aluminum grip handle and steel spear head.
Mini-Rooter Pro, Now with Wheels and Folding Handle
Spin-Thru, DYI Drain Cleaners
AutoCut, Copper Tubing Cutter
The Mini-Rooter Pro clears drains from rooftop to basement, including kitchen, bath, and laundry drains. And it’s portable too: Built-in wheels make it easier for you to transport the Pro to and from the job, and the folding handle allows for compact storage in your truck.
This inexpensive, light weight machine has lots of time-saving features. For instance, you can remove the drum in seconds for more portability or to switch to a different diameter cable – with no mess and no lost time. A distributor tube inside the drum allows you to feed cable in and out without chucking and releasing the cable every few feet – so you finish quicker. An optional Power Cable Feed drives and retracts the cable at up to 16 feet per minute.
The drum carries up to 75 ft of 3/8” cable to clear 2” to 3” lines, or 1/2” cable for heavier work in 4” lines. For small drain work, you can order your Mini-Rooter Pro with a J-Drum for handling smaller, more flexible cables.
Some Mini-Rooter Pro safety features: A foot pedal that uses air pressure to start and stop the machines, with no electrical wiring between the pedal and motor, a ground fault circuit interrupter, and a high impact plastic guard covering the motor pulley.
A cleaner way to open clogged drains. The 1/4″ (6 mm) spring is fed out of the drum into the line, keeping it away from clean kitchen and bathroom surfaces. SM models have a rugged steel drum and a “T” grip handle for more convenient use in laundry tubs. Complete directions on back of card. Also available individually boxed.
A great drain cleaner upgrade: our steel drum Spin-Thru is equipped with a spindle so it can be attached to an electric drill. Supplied with display card with complete directions on back. Also available individually boxed.
This is a great tool to have when you don’t have enough swing room to use a full size tubing cutter. You can cut copper tubing with less than one inch of clearance. Or you can easily handle close stub-out work.
And it’s quicker than conventional cutters. Just snap it on the tube, close the gate and turn. The cutter wheel automatically tightens as you turn the AutoCut – no knobs to twist. The cutter wheel is spring loaded to provide a constant cutting pressure, so you’ll never accidentally crimp the tubing.
For extra leverage in awkward spaces, you can get a Ratchet Turning Handle. It slides over the AutoCut from either side for maximum ease of operation.
The AutoCut has long lasting hardened steel cutting wheels that are easy to replace when the time comes. Keep all three in your toolbox. Watch out though, they’ll spoil you.
Closet Auger
